SHADES Lacquer Primer is a quick drying water-based primer with perfect coverage, based on a tribrid technology. Due to its unique combination of alkydhars- and acryllack technology, it’s very suitable as primer and adhesive primer on wood, MDF, hard plastics and non-ferrous metals (aluminium, zinc, etc.). SHADES Lacquer Primer is easy to sand and fits perfectly into a paint system with solvent-based and waterborne SHADES paints.
SURFACE AND PRE-TREATMENT
For use on untreated wood, MDF and hard plastics: degrease, sand the surface and make free of dust. For non-ferrous metals: degrease with thinner, rough up with steel wool and clean with benzine. For damaged coats of paint: remove and treat as untreated wood.
Stir thoroughly before use. Apply 1 or 2 full coats indoor, outdoor always 2 coats. Use a suited paint roller, brush or airless paint sprayer. The first coat can be diluted with a little water. Sand lightly between coats and make free of dust. Carry out any repairs and prime the repaired spots. Visit our website for suitable paint accessories.
Approx. 13 m2/L per coat.
DRYING TIME AT 23°C AND RH 65%
Dry after approx. 1 hour, recoatable after 6 hours.
Do not use at temperatures below +8°C., in direct sun or when rain is expected. After use, clean tools with water. Transport and store frost-free.